R/C Car YouTube News & VideosModelPress

Thrilling RC Car Jump: Damage, Repairs, and $1,000 Prize Draw

Thrilling RC Car Jump: Damage, Repairs, and $1,000 Prize Draw
Image copyright Youtube
Authors
    Published on
    Published on

In this thrilling escapade, the East Tactics crew embarks on a daring mission to jump a considerable gap between two towering parking garages with their trusty RC car. As the tension builds, the team readies themselves, with the audience on edge, bracing for the heart-stopping leap. With a burst of adrenaline, the RC car hurtles through the air, landing with a thunderous impact, leaving the onlookers in awe. However, the triumph is short-lived as the vehicle emerges from the stunt bearing battle scars, requiring immediate attention.

Undeterred by the damage, the team delves into the intricate world of RC car repairs, uncovering the surprisingly simple solutions to the broken components. From shattered rods to damaged shock rod ends, each part is meticulously examined and swiftly replaced, showcasing the team's resilience and expertise in the face of adversity. Despite the intense nature of the jump, the repairs are executed with finesse, highlighting the team's dedication to their craft and the unwavering spirit of the RC car community.

Amidst the chaos of repairs, the team takes a moment to express their gratitude to the participants and sponsors of an upcoming event, teasing an exciting $1,000 prize draw that promises to add a dash of competition to the mix. With a rallying cry to support the sponsors and gear up for future RC adventures in the pipeline, the East Tactics crew signs off with a mix of anticipation and fervor, eager to conquer new challenges and push the boundaries of RC car excitement in the upcoming year.

thrilling-rc-car-jump-damage-repairs-and-1000-prize-draw

Image copyright Youtube

thrilling-rc-car-jump-damage-repairs-and-1000-prize-draw

Image copyright Youtube

thrilling-rc-car-jump-damage-repairs-and-1000-prize-draw

Image copyright Youtube

thrilling-rc-car-jump-damage-repairs-and-1000-prize-draw

Image copyright Youtube

Watch East Tactics August GAP Challenge ENTRY on Youtube

Viewer Reactions for East Tactics August GAP Challenge ENTRY

Positive comments on the jump and the minimal damage

Compliments on the body of the vehicle

Impressed by the gap and the jump

Mention of the slow-motion footage making the jump look even more impressive

Excitement for the fun day and the jump

Compliments on the skill and execution of the jump

Questions about winter games and the drawing

Technical question about ESC and motors compatibility for an RC plane

june-jump-challenge-winners-revealed-triple-flips-required
East Tactics

June Jump Challenge: Winners Revealed, Triple Flips Required!

East Tactics announces the June jump challenge, showcasing winners from the previous month. Participants must perform single, double, and triple flips in their videos. Sponsors like Hyperflow fans and Cow RC support the event. Exclusive merchandise available.

extreme-thrills-east-tactics-ramp-reinforcement-and-aerial-feats
East Tactics

Extreme Thrills: East Tactics' Ramp Reinforcement and Aerial Feats

East Tactics takes on the monthly front flip jump challenge, reinforcing his ramp and showcasing impressive aerial stunts. Despite setbacks, camaraderie shines as a young fan offers help. The article highlights the thrill of extreme sports and the resilience of the athlete.

nimh-battery-recovery-tips-voltage-awareness-for-successful-revival
East Tactics

NIMH Battery Recovery Tips: Voltage Awareness for Successful Revival

East Tactics demonstrates battery recovery using NIMH mode, emphasizing vigilance and voltage awareness for successful revival. Approach with caution for optimal results.

mastering-3d-printer-repair-precision-tips-for-hotend-assembly-replacement
East Tactics

Mastering 3D Printer Repair: Precision Tips for Hotend Assembly Replacement

East Tactics addresses poor bed adhesion causing a printer glob. They demonstrate replacing the damaged hotend heating assembly with precision, emphasizing maintenance to avoid future mishaps. Expert tips ensure successful 3D printer repair.